ASTAR - Literature:


  1. Dasgupta A.,  Murugesan S. , Saroja S., Vijayalakshmi M., Luysberg M., Veron M., Rauch E., Jayakumar T. Structure of grains and grain boundaries in cryo-mechanically processed Ti alloy J Mater Sci (2013) 48:4592–4598 (DOI: 10.1007/s10853-013-7190-3)

  2. Jorge Jr. A. M., Prokofiev E., de Lima G. F., Rauch E., Veron M., Botta W. J., Kawasaki M., Langdon T. G. An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing International journal of hydrogen energy 38 (2013) 8306 – 8312 (DOI:10.1016/j.ijhydene.2013.03.158).

  3. Baraldi A., Buffagni E., Capelletti R.,  Mazzera M., Fasoli M., Lauria A.,    Moretti F., Vedda A., Gemmi M. Eu Incorporation into Sol−Gel Silica for Photonic Applications: Spectroscopic and TEM Evidences of αQuartz and Eu Pyrosilicate Nanocrystal Growth J. Phys. Chem. C 2013, 117, 26831−26848 (DOI: 10.1021/jp4101174)

  4. Bernier N., Xhoffer C.,  De Putte T. V., Galceran M., Godet S. Structure analysis of aluminium silicon manganese nitride precipitates formed in grain-oriented electrical steels MATERIALS CHARACTERIZAION 86 (2013) 116–126 (DOI: 10.1016/j.matchar.2013.09.014)

  5. Brons J. G., Thompson G. B. Orientation Mapping via Precession-Enhanced Electron Diffraction and Its Applications in Materials Science JOM January 2014, Volume 66, Issue 1, pp 165-170 (DOI: 10.1007/s11837-013-0799-5)

  6. Brons J. G., Thompson G. B. A comparison of grain boundary evolution during grain growth in fcc metals Acta Materialia 61 (2013) 3936–3944 (DOI: 10.1016/j.actamat.2013.02.057)

  7. Cao L., Ganesh K. J., Zhang L., Aubel O., Hennesthal C., Hauschildt M.,. Ferreira P. J, Ho P. S. Grain structure analysis and effect on electromigration reliability in nanoscale Cu interconnects Applied Physics Letters 102, 131907 (2013) (DOI:

  8. Wen M., Cizek P., Wen C., Hodgson P., Li Y. Microstructural characteristics of a nanoeutectic Ag–Cu alloy processed by surface mechanical attrition treatment Scripta Materialia 68 (2013) 499–502 (DOI: 10.1016/j.scriptamat.2012.11.033)

  9. Han W., Demkowicz M. J., Mara N. A., Fu E., Sinha S., Rollett A. D., Wang Y. , Carpenter J. S., Beyerlein I.  J., Misra A. Design of Radiation Tolerant Materials Via Interface Engineering Adv. Mater. (2013), 25, 6975–6979 (DOI: 10.1002/adma.201303400)

  10. Švec P., Janotová I., Hoško J., Kepaptsoglou D. M., Maťko I., Janičkovič D., Švec Sr P. PHASE MAPPING OF IRON-BASED RAPIDLY QUENCHED ALLOYS USING PRECESSION ELECTRON DIFFRACTION (Proceedings of the 19th International conference on APPLIED PHYSICS OF CONDENSED MATTER)

  11. Kobler A., Kashiwar A., Hahn H., Kübel C. Combination of in situ straining and ACOM TEM: A novel method for analysis of plastic deformation of nanocrystalline metals Ultramicroscopy 128 (2013) 68–81 (DOI: 10.1016/j.ultramic.2012.12.019)

  12. In Situ Straining Analysis with ACOM-TEM, Article in Imaging and Microscopy

  13. Kobler A., Lohmiller, J. Schäfer J., Kerber M.,. Castrup A, Kashiwar A., Gruber P. A., Albe K., Hahn H., Kübel C. Deformation-induced grain growth and twinning in nanocrystalline palladium thin films Beilstein J. Nanotechnol. (2013), 4, 554–566 (DOI: 10.3762/bjnano.4.64).

  14. Liu X., Choi D., Beladi H., Nuhfer N. T., Rohrer G. S., Barmak K.  The five-parameter grain boundary character distribution of nanocrystalline tungsten Scripta Materialia 69 (2013) 413–416 (DOI: 10.1016/j.scriptamat.2013.05.046)

  15. Lohmiller J., Kobler A., Spolenak R., Gruber P. A. The effect of solute segregation on strain localization in nanocrystalline thin films: Dislocation glide vs. grain-boundary mediated plasticity Applied Physics Letters 102, 241916 (2013)  (DOI:

  16. Mompiou F., Legros M., Boe´ A., Coulombier M., Raskin J.-P., Pardoen T. Inter- and intragranular plasticity mechanisms in ultrafine-grained Al thin films: An in situ TEM study Acta Materialia 61 (2013) 205–216 (DOI: 10.1016/j.actamat.2012.09.051)

  17. Moore D. B., Beekman M., Disch S., Zschack P., Häusler I., Neumann W., Johnson D. C. Synthesis, Structure, and Properties of Turbostratically Disordered (PbSe)1.18(TiSe2)2 Chem. Mater. (2013), 25, 2404−2409 (DOI: 10.1021/cm400090f)

  18. Lohmiller J., Baumbusch R., Kraft O., Gruber P. A.  Differentiation of Deformation Modes in Nanocrystalline Pd Films Inferred from Peak Asymmetry Evolution Using In Situ X-Ray Diffraction PRL 110, 066101 (2013) (DOI:

  19. Stormvinter A., Hedström P., Borgenstam A. A Transmission Electron Microscopy Study of Plate Martensite Formation in High-carbon Low Alloy Steels J. Mater. Sci. Technol., 2013, 29(4), 373-379 (DOI: 10.1016/j.jmst.2013.01.016)

  20. Polyakov M. N., Courtois-Manara E., Wang D., Chakravadhanula K., Kübel C., Hodge A. M. Microstructural variations in Cu/Nb and Al/Nb nanometallic multilayers Applied Physics Letters 102, 241911 (2013) (DOI:

  21. Viladot D., Veron M., Gemmi M., Peiró F., Portillo J., Estrade S., Mendoza J., Llorca-Isern N., Nicolopoulos S. Orientation and phase mapping in the transmission electron microscope using precession-assisted diffraction spot recognition: state-of-the-art results Journal of Microscopy, Vol. 252, Issue 1 2013, pp. 23–34 (DOI: 10.1111/jmi.12065)

  22. Wang Y. M., Sansoz F., LaGrange T., Ott R. T., Marian J., Barbee Jr. T. W., Hamza  A. V. Defective twin boundaries in nanotwinned metals Nature Materials,Vol 12, August 2013 (DOI:10.1038/nmat3646)

  23. Botta W. J., Jorge Jr. A.M., Veron M., Rauch E. F., Ferrie E., Yavari A. R., Huot J., Leiva D. R. H-sorption properties and structural evolution of Mg processed by severe plastic deformationJournal of Alloys and Compounds (2013) S187-S191 (DOI: 10.1016/j.jallcom.2013.03.013)

  24. Idell Y., Facco G., Kulovits A., Shankar M. R., Wiezorek J. M. K. Strengthening of austenitic stainless steel by formation of nanocrystalline c-phase through severe plastic deformation during two-dimensional linear plane-strain machining Scripta Materialia 68 (2013) 667-670 (DOI: 10.1016/j.scriptamat.2013.01.025)

  25. Galand R., Brunetti G., Arnaud L., Rouvière J.-L., Clément L., Waltz P., Wouters Y. Microstructural void environment characterization by electron imaging in 45 nm technology node to link electromigration and copper microstructure.Microelectronic Engineering 106 (2013) 168–171 (DOI:10.1016/j.mee.2013.01.018)

  26. Martinez M., Legros M., Signamarcheix T., Bally L., Verrun S., Di Cioccio L., Deguet C. Mechanisms of copper direct bonding observed by in-situ and quantitative transmission electron microscopyThin Solid Films 530 (2013) 96–99(DOI: 10.1016/j.tsf.2012.02.056)

  27. Ning J.-l., Courtois-Manara E., Kurmanaeva L., Ganeev A. V., Valiev R. Z., Kübel C., Ivanisenko Y. Tensile properties and work hardening behaviors of ultrafine grained carbon steel and pure iron processed by warm high pressure torsion.Materials Science and Engineering A (2013) 8-15 (DOI: 10.1016/j.msea.2013.05.008)

  28. Amin-Ahmadi B., Idrissi H., Galceran M., Colla M.S., Raskin J.P., Pardoen T., Godet S., Schryvers D. Effect of deposition rate on the microstructure of electron beam evaporated nanocrystalline palladium thin filmsThin Solid Films 539 (2013) 145–150 (DOI: 10.1016/j.tsf.2013.05.083)

  29. Galceran M., Albou A., Renard K., Coulombier M., Jacques P.J., Godet S. Automatic Crystallographic Characterization in a Transmission Electron Microscope: Applications to Twinning Induced Plasticity Steels and Al Thin Films. Microscopy and Microanalysis 19 (2013) 693-697 (DOI: 10.1017/S1431927613000445)

  30. Koblera A., Kashiwar A., Hahn H., Kuebel C. Combination of in situ straining and ACOM TEM: A novel method for analysis of plastic deformation of nanocrystalline metalsUltramicroscopy 128 (2013) 68-81 (DOI:10.1016/j.ultramic.2012.12.019)

  31. LaGrange T., Reed B. W., Wall M., Mason J., Barbee T., Kumar M. Topological view of the thermal stability of nanotwinned copperAppl. Phys. Lett. 102 (2013) 011905 (DOI: 10.1063/1.4772589)

  32. Darbal A. D., Ganesh K. J., Liu X., Lee S.-B., Ledonne J., Sun T., Yao B., Warren A.P., Rohrer G. S., Rollett A. D., Ferreira P. J., Coffey K. R., Barmak K. Grain Boundary Character Distribution of Nanocrystalline Cu Thin Films Using Stereological Analysis of Transmission Electron Microscope Orientation MapsMicrosc. Microanal. 19 (2013) 111–119 (DOI: 10.1017/S1431927612014055

  33. Elmay W., Prima F., Gloriant T., Bolle B., Zhong Y., Patoor E., Laheurte P. Effects of thermomechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy. J. Mech. Beh. Biomed. Mat. 18 (2013) 47–56 (DOI: 10.1016/j.jmbbm.2012.10.018)

  34. Brons J. G., Padilla II H. A., Thompson G. B., Boyce B. L. Cryogenic Indentation-Induced Grain Growth in Nanotwinned Copper. Scripta Materialia 68 (2013) 781-784 (DOI:10.1016/j.scriptamat.2012.12.026)

  35. Tzedaki M., Galceran M., Turner S., Godet S., De Graeve I., Kernig B., Hasencleverd J., Terryna H. Structure and formation mechanism of rolled-in oxide areas on aluminum lithographic printing sheetsScripta Materialia 68 (2013) 233–236 (DOI: 10.1016/j.scriptamat.2012.10.021)

  36. Albou A., Galceran M., Renard K., Godet S., Jacques P. J. Nanoscale characterization of the evolution of the twin-matrix orientation in Fe-Mn-C twinning-induced plasticity steel by means of transmission electron microscopy orientation mapping Scripta Materialia 68 (2013) 400-403 (DOI: 10.1016/j.scriptamat.2012.10.052)

  37. Lee S. B., Kim D. -I., Hong S. -H., Lee D. N. Texture evolution of abnormal grains with post-deposition annealing temperature in nanocrystalline Cu thin films Metall. Mat. Transact. A: Phys. Metall. and Mat. Sci. 44 (2013) 152-162 (DOI: 10.1007/s11661-012-1542-5)

  38. Beausir B., Fressengeas C. Disclination densities from EBSD orientation mapping International Journal of Solids and Structures 50 (2013) 137-146 (DOI: 10.1016/j.ijsolstr.2012.09.016)